Sản phẩm đa dạng

Cam kết sản phẩm chất lượng 100%

Ảnh thật 100%

Sản phẩm được chụp trực tiếp

Đầy đủ giấy tờ CO/CQ

Sản phẩm có đầy đủ CO/CQ

Thanh toán an toàn

Thanh toán đa dạng, đảm bảo tin cậy

Giá cả cạnh tranh, linh hoạt

Luôn có giá tốt nhất cho khách hàng

bac-lot-tay-can-bom-thuy-luc-xe-nang-tay-02

DÒNG LES - SMC

Mã hàng ( Item code ): SMC.LES8DAJ-30

Bơm

Xóa

Main Body, Peripheral Components	Main Body	Type	Slider
Stroke(mm)	30	Max. Transportable Mass Range (Horizontal)(kg)	0~2.0
Max. Transportable Mass (Horizontal)(kg)	1	Max. Transportable Mass Range (Vertical)(kg)	0~2.0
Max. Transportable Mass (Vertical)(kg)	0.5	Drive Method	-
Guide	Provided	Lead(mm)	8
Input Power Supply	DC24V	Position Detection	Incremental
I/O Module	Not Provided	Table Width W1(mm)	32.2
Brake	Not Provided	Max. Thrust Force Range(N)	0~100
Max. Thrust Force(N)	7.5	Noise Filter	Not Provided
Table Length L1(mm)	88.5	Operating Environment	Standard
Positioning Repeatability(µm)	±50	Maximum Velocity(mm/sec)	400
Size	8	Motor type	Servo motor (24 V DC)
Motor mounting position	In-line motor type / D type	Motor options	No options
Mounting support	Without side holder	Actuator/cable type	Without cable
Actuator cable length(m)	Without cable	Controller/driver type	Without controller/driver
I/O cable length / communication plug(m)	Without cable (without communication plug connector)	Controller/driver mounting method	Screw mounting type

Khuyến mãi:

Miễn phí vận chuyển nội thành Hà Nội
Giảm ngay 5% cho đơn hàng > 5.000.000đ
1 đổi 1 với bt kỳ lỗi nào của nhà sản xuất

(*) Thông tin bắt buộc cần phải điền

Mô tả

Electric Slide Table, Compact Type LES Series Specifications

Basic type (R type) external appearance

Symmetric type (L type) external appearance

In-line motor type (D type) external appearance

Specifications / Step Motor (24‑V DC Servo)

Model			LES8□		LES16□		LES25□
Actuator Specifications	Stroke [mm]		30, 50, 75		30, 50, 75, 100		30, 50, 75, 100, 125, 150
	Work Load [kg] ^{Note 1:}	Horizontal	1		3		5
	Work Load [kg] ^{Note 1:}	Vertical	0.5	0.25	3	1.5	5	2.5
	Pushing Force 30 to 70% [N] ^{Note 2: Note 3:}		6 to 15	4 to 10	23.5 to 55	15 to 35	77 to 180	43 to 100
	Speed [mm/s] ^{Note 1: Note 3:}		10 to 200	20 to 400	10 to 200	20 to 400	10 to 200	20 to 400
	Pushing Speed [mm/s]		10 to 20	20	10 to 20	20	10 to 20	20
	Maximum Acceleration/Deceleration [mm/s²]		5,000
	Positioning Repeatability [mm]		±0.05
	Lost Motion [mm] ^{Note 4:}		0.3 or less
	Screw Lead [mm]		4	8	5	10	8	16
	Impact/Vibration Resistance [m/s²] ^{Note 5:}		50/20
	Actuation Type		Slide screw + belt (R/L type), Slide screw (D type)
	Guide Type		Linear guide (circulating)
	Operating Temperature Range [°C]		5 to 40
	Operating Humidity Range [%RH]		90 or less (no condensation)
Electrical Specifications	Motor Size		□20		□28		□42
	Motor type		Step motor (24‑V DC servo)
	Encoder		Incremental A/B phase (800 pulses/rotation)
	Rated Voltage [V]		24 DC ±10%
	Power Consumption [W] ^{Note 6:}		18		69		45
	Standby Power Consumption When Operating [W] ^{Note 7:}		7		15		13
	Maximum Instantaneous Power Consumption [W] ^{Note 8:}		35		69		67
Lock Specifications	Type	^{Note 9:}	Non-excitation operation (non-magnetizing lock)
	Holding Force [N]		24	2.5	300	48	500	77
	Power Consumption [W] ^{Note 10:}		3.5		2.9		5
	Rated Voltage [V]		24 DC ±10%

Note 1: The speed changes according to the work load. Check the SMC catalog for the "Speed-Work Load" graph.
Note 2: Pushing force accuracy is ±20% (F.S.)
Note 3: The speed and force may change depending on the cable length, load, mounting conditions, etc. If the cable length exceeds 5 m, the speed and force will decrease by up to 10% for each 5 m. (At 15 m: reduced by up to 20%)
Note 4: A reference value for correcting an error in reciprocal operation.
Note 5: Vibration resistance: No malfunction occurred in a test ranging between 45 to 2,000 Hz (1 sweep), performed in both an axial direction and perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 6: The power consumption (including the controller) is for when the actuator is operating.
Note 7: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position during operation. Except during pushing operations.
Note 8: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 9: With lock only.
Note 10: For an actuator with a lock, add the power consumption for the lock.

Specifications / Servo Motor (24 V DC)

Model			LES8□A		LES16□A		LES25RA ^{Note 1:} LES25LA ^{Note 1:}
Actuator Specifications	Stroke [mm]		30, 50, 75		30, 50, 75, 100		30, 50, 75, 100, 125, 150
	Work Load [kg]	Horizontal	1		3		5
	Work Load [kg]	Vertical	1	0.5	3	1.5	4	2
	Pushing Force 50 to 100% [N] ^{Note 2:}		7.5 to 11	5 to 7.5	17.5 to 35	10 to 20	31 to 62	19 to 38
	Speed [mm/s]		1 to 200	1 to 400	1 to 200	1 to 400	1 to 200	1 to 400
	Pushing Speed [mm/s]		1 to 20
	Maximum Acceleration/Deceleration [mm/s²]		5,000
	Positioning Repeatability [mm]		±0.05
	Lost Motion [mm] ^{Note 3:}		0.3 or less
	Screw Lead [mm]		4	8	5	10	8	16
	Impact/Vibration Resistance [m/s²] ^{Note 4:}		50/20
	Actuation Type		Slide screw + belt (R/L type), Slide screw (D type)
	Guide Type		Linear guide (circulating)
	Operating Temperature Range [°C]		5 to 40
	Operating Humidity Range [%RH]		90 or less (no condensation)
Electrical Specifications	Motor Size		□20		□28		□42
	Motor Output [W]		10		30		36
	Motor type		Servo motor (24 V DC)
	Encoder (Angular Displacement Sensor)		Incremental A/B/Z phase (800 pulses/rotation)
	Rated Voltage [V]		24 DC ±10%
	Power Consumption [W] ^{Note 5:}		42		68		97
	Standby Power Consumption When Operating [W] ^{Note 6:}		8 (horizontal) / 19 (vertical)		9 (horizontal) / 23 (vertical)		16 (horizontal) / 32 (vertical)
	Maximum Instantaneous Power Consumption [W] ^{Note 7:}		71		102		111
Lock Specifications	Type	^{Note 8:}	Non-excitation operation (non-magnetizing lock)
	Holding Force [N]		24	2.5	300	48	500	77
	Power Consumption [W] ^{Note 9:}		3.5		2.9		5
	Rated Voltage [V]		24 DC ±10%

Note 1: LES25DA is not available.
Note 2: The pushing force range for LES8□A is 50 to 75%. Pushing force accuracy is ±20% (F.S.)
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Vibration resistance: No malfunction occurred in a test ranging between 45 to 2,000 Hz (1 sweep), performed in both an axial direction and perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position while operating with maximum load. Except during pushing operations.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Dimensions - Basic Type / R Type

(Units: mm)

LES8R dimensional drawing

Connector Dimensional Drawing (LES8R)

(Units: mm)

Model	L	D	E	F	G	H	J
LES8R□□-30□-□□□□□	94.5	26	88.7	62.5	2	27	27
LES8R□□-50□-□□□□□	137.5	46	131.7	105.5	3	29	58
LES8R□□-75□□-□□□□□	162.5	50	156.7	130.5	4	30	60

Note 1: Range within which the table can move when it returns to origin, etc. Make sure any workpiece mounted on the table does not interfere with the workpieces and equipment, etc., around the table.
Note 2: Position after return to origin.
Note 3: Values within [ ] are for when the direction of return to origin has been changed.
Note 4: If workpiece-retaining screws are too long, they may touch the guide block and cause a malfunction. Use screws that are between the maximum and minimum screw-in depths in length.
Note 5: Secure the motor cable and lock cable so that they are not repeatedly bent.

LES16R dimensional drawing

Connector Dimensional Drawing (LES16R)

(Units: mm)

Model	L	C	D	E	F	G	H	J
LES16R□□-30□-□□□□□	108.5	4	38	102.3	78	2	40	40
LES16R□□-50□-□□□□□	136.5	6	34	130.3	106	2	78	78
LES16R□□-75□□-□□□□□	180.5	8	36	174.3	150	4	36	72
LES16R□□-100□□-□□□□□	205.5	10	36	199.3	175	5	36	108

Xem thêm

DÒNG LES - SMC

Mã hàng ( Item code ): SMC.LES8DAJ-30

Mô tả

Electric Slide Table, Compact Type LES Series Specifications

Specifications / Step Motor (24‑V DC Servo)

Specifications / Servo Motor (24 V DC)

Dimensions - Basic Type / R Type

Sản phẩm tương tự

Đăng nhập