Sản phẩm đa dạng

Cam kết sản phẩm chất lượng 100%

Ảnh thật 100%

Sản phẩm được chụp trực tiếp

Đầy đủ giấy tờ CO/CQ

Sản phẩm có đầy đủ CO/CQ

Thanh toán an toàn

Thanh toán đa dạng, đảm bảo tin cậy

Giá cả cạnh tranh, linh hoạt

Luôn có giá tốt nhất cho khách hàng

bac-lot-tay-can-bom-thuy-luc-xe-nang-tay-02

DÒNG LEFB - SMC

Mã hàng ( Item code ): SMC.LEFB16AT-1000-R16N1

Bơm

Xóa

Main Body, Peripheral Components	Main Body	Type	Slider
Stroke(mm)	1,000	Max. Transportable Mass Range (Horizontal)(kg)	0~2.0
Max. Transportable Mass (Horizontal)(kg)	1	Drive Method	Belt
Guide	Provided	Lead(mm)	48
Input Power Supply	DC24V	Position Detection	Incremental
I/O Module	NPN	Table Width W1(mm)	39.4
Brake	Not Provided	Noise Filter	Not Provided
Table Length L1(mm)	72	Operating Environment	Standard
Positioning Repeatability(µm)	±80	Maximum Velocity(mm/sec)	3,000
Size	16	Motor type	Servo motor (24 V DC)
Motor options	Without lock	Actuator/cable type	Robotic cable (flex-resistant cable)
Actuator cable length(m)	1	Controller/driver type	LECP6/LECA6 (step data input type)
I/O cable length / communication plug(m)	1	Controller/driver mounting method	Screw mounting type

Khuyến mãi:

Miễn phí vận chuyển nội thành Hà Nội
Giảm ngay 5% cho đơn hàng > 5.000.000đ
1 đổi 1 với bt kỳ lỗi nào của nhà sản xuất

(*) Thông tin bắt buộc cần phải điền

Mô tả

Electric Actuator, Slider Type, Belt Drive LEFB Series Specifications

Electric Actuator, Slider Type, Belt Drive LEFB Series external appearance

Specifications / Step Motor (24‑V DC Servo)

Model				LEFB16	LEFB25	LEFB32
Actuator Specifications	Stroke [mm] ^{Note 1:}			300, 500, 600, 700 800, 900, 1,000	300, 500, 600, 700, 800, 900 1,000, 1,200, 1,500, 1,800, 2,000	300, 500, 600, 700, 800, 900 1,000, 1,200, 1,500, 1,800, 2,000
	Work Load [kg] ^{Note 2:}	Horizontal	LECP6/LECP1/LECPMJ JXCE1/91/P1/D1	1	10	19
	Work Load [kg] ^{Note 2:}	Horizontal	LECPA	1	5	14
	Speed [mm/s] ^{Note 2:}			48 to 1,100	48 to 1,400	48 to 1,500
	Maximum Acceleration/Deceleration [mm/s²]			3,000
	Positioning Repeatability [mm]			±0.08
	Lost Motion [mm] ^{Note 3:}			0.1 or less
	Lead [mm]			48	48	48
	Impact/Vibration Resistance [m/s²] ^{Note 4:}			50/20
	Actuation Type			Belt
	Guide Type			Linear guide
	Operating Temperature Range [°C]			5 to 40
	Operating Humidity Range [%RH]			90 or less (no condensation)
Electrical Specifications	Motor Size			□28	□42	□56.4
	Motor type			Step motor (24‑V DC servo)
	Encoder			Incremental A/B phase (800 pulses/rotation)
	Rated Voltage [V]			24 DC ±10%
	Power Consumption [W] ^{Note 5:}			24	32	52
	Standby Power Consumption When Operating [W] ^{Note 6:}			18	16	44
	Maximum Instantaneous Power Consumption [W] ^{Note 7:}			51	60	127
Lock Specifications	Type ^{Note 8:}			Non-excitation operation (non-magnetizing lock)
	Holding Force [N]			4	19	36
	Power Consumption [W] ^{Note 9:}			2.9	5	5
	Rated Voltage [V]			24 DC ±10%

Note 1: Non-standard strokes are manufactured as custom orders.
Note 2: The speed changes according to the controller/driver type and work load. See p. 41 of the SMC catalog ("Speed−Work Load Graph (Guide)") for more details. Furthermore, if the cable length exceeds 5 m, then it will decrease by up to 10% for each 5 m. Cannot be used vertically.
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 and 2,000 Hz (1 sweep), performed in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position during operation.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Specifications / Servo Motor (24 V DC)

Model			LEFB16A	LEFB25A
Actuator Specifications	Stroke [mm] ^{Note 1:}		300, 500, 600, 700 800, 900, 1,000	300, 500, 600, 700, 800, 900 1,000, 1,200, 1,500, 1,800, 2,000
	Work Load [kg] ^{Note 2:}	Horizontal	1	2
	Speed [mm/s] ^{Note 2:}		5 to 2,000	5 to 2,000
	Maximum Acceleration/Deceleration [mm/s²]		3,000
	Positioning Repeatability [mm]		±0.08
	Lost Motion [mm] ^{Note 3:}		0.1 or less
	Lead [mm]		48	48
	Impact/Vibration Resistance [m/s²] ^{Note 4:}		50/20
	Actuation Type		Belt
	Guide Type		Linear guide
	Operating Temperature Range [°C]		5 to 40
	Operating Humidity Range [%RH]		90 or less (no condensation)
Electrical Specifications	Motor Size		□28	□42
	Motor Output [W]		30	36
	Motor type		Servo motor (24 V DC)
	Encoder		Incremental A/B (800 pulses/rotation) / Z phase
	Rated Voltage [V]		24 DC ±10%
	Power Consumption [W] ^{Note 5:}		78	69
	Standby Power Consumption When Operating [W] ^{Note 6:}		Horizontal 4	Horizontal 5
	Maximum Instantaneous Power Consumption [W] ^{Note 7:}		87	120
Lock Specifications	Type ^{Note 8:}		Non-excitation operation (non-magnetizing lock)
	Holding Force [N]		4	19
	Power Consumption [W] ^{Note 9:}		2.9	5
	Rated Voltage [V]		24 DC ±10%

Note 1: Non-standard strokes are manufactured as custom orders.
Note 2: See p. 42 of the SMC catalog ("Speed−Work Load Graph (Guide)") for more details. Furthermore, if the cable length exceeds 5 m, then it will decrease by up to 10% for each 5 m.
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 and 2,000 Hz (1 sweep), performed in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position while operating with maximum load.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Dimensions / Belt Drive

(Units: mm)

LEFB16 dimensional drawing

LEFB16 positioning pin hole (Note 5) (Optional): Body bottom surface dimensions

LEFB16□T-300□/L: 495.5 mm, A: 306 mm, B: 435 mm, n: 6 mm, D: 2 mm, E: 300 mm, G: 280 mm
LEFB16□T-500□/L: 695.5 mm, A: 506 mm, B: 635 mm, n: 10 mm, D: 4 mm, E: 600 mm, G: 580 mm
LEFB16□T-600□/L: 795.5 mm, A: 606 mm, B: 735 mm, n: 10 mm, D: 4 mm, E: 600 mm, G: 580 mm
LEFB16□T-700□/L: 895.5 mm, A: 706 mm, B: 835 mm, n: 12 mm, D: 5 mm, E: 750 mm, G: 730 mm
LEFB16□T-800□/L: 995.5 mm, A: 806 mm, B: 935 mm, n: 14 mm, D: 6 mm, E: 900 mm, G: 880 mm
LEFB16□T-900□/L: 1,095.5 mm, A: 906 mm, B: 1,035 mm, n: 14 mm, D: 6 mm, E: 900 mm, G: 880 mm
LEFB16□T-1000□/L: 1,195.5 mm, A: 1,006 mm, B: 1,135 mm, n: 16 mm, D: 7 mm, E: 1,050 mm, G: 1,030 mm

Note 1: Because of the rounded chamfering, when mounting the actuator using the body mounting reference plane, set the height of the opposite surface or pin to be at least 2 mm or more. (Recommended height: 5 mm)
Note 2: Distance within which the table can move when it returns to origin, etc. Make sure any workpiece mounted on the table does not interfere with the workpieces and equipment, etc., around the table.
Note 3: Position after return to origin.
Note 4: Values within [ ] are for when the direction of return to origin has been changed.
Note 5: When using the body bottom positioning pin holes, do not use the housing B bottom pin hole.

Diagram

LEFB Series diagram 1

LEFB Series diagram 2

Number	Part Name	Material	Note
1	Body	Aluminum alloy	Anodized
2	Rail Guide	-	-
3	Belt	-	-
4	Belt Holder	Carbon steel	Chromated
5	Belt Stopper	Aluminum alloy	Anodized
6	Table	Aluminum alloy	Anodized
7	Blanking Plate	Aluminum alloy	Anodized
8	Seal Band Holder	Synthetic resin	-
9	Housing A	Aluminum diecast	Coating
10	Pulley Holder	Aluminum alloy	-
11	Pulley Shaft	Stainless steel	-
12	End Pulley	Aluminum alloy	Anodized
13	Motor Pulley	Aluminum alloy	Anodized
14	Motor Mount	Aluminum alloy	Anodized
15	Motor Cover	Aluminum alloy	Anodized
16	End Cover	Aluminum alloy	Anodized
17	Band Stopper	Stainless steel	-
18	Motor	-	-
19	Rubber Bushing	NBR	-
20	Stopper	Aluminum alloy	-
21	Dust Seal Band	Stainless steel	-
22	Bearing	-	-
23	Bearing	-	-
24	Tension Adjustment Cap Screw	Chrome molybdenum steel	Chromated
25	Pulley Retaining Screw	Chrome molybdenum steel	Chromated

Xem thêm